LEXAN 915R PC/中高流動,良好的釋放性,UL94VO
欣隆全塑膠
LEXAN 915R PC/中高流動,良好的釋放性,UL94VO_價格_物性_圖片_UL黃卡
LEXAN 915R PC特性:具有中/高流動性和良好的釋放性,它的MVR為18（300°C / 1.2kg),UL94 [email protected],[email protected]??銷LEXAN 915R PC阻燃級系列塑料,隨貨提供PC 915R阻燃級系列價格,物性,圖片,UL黃卡.
全國24小時銷售熱線:
0769-83023208產品詳情
LEXAN 915R PC/中高流動,良好的釋放性,UL94VO/塑料的特性：
沙伯基礎SABIC塑料LEXAN 915R聚碳酸酯（PC）是一種可注射成型的非氯化和非溴化，未填充的阻燃級，具有中/高流動性和良好的釋放性, 它的MVR為18（300°C / 1.2kg），UL94 [email protected]，有多種不透明顏色可供選擇。
LEXAN 915R PC/中高流動,良好的釋放性,UL94VO/塑料的應用領域：
電子器件外殼，車燈外殼，儀表板，打印機進紙板，打印機進紙導軌，電動工具外殼，商務儀器部件等.
阻燃PC標準成型條件 -以下是具有代表性的成型條件:
料管溫度（后部） | ℃ | 260-280 | 270-290 |
料管溫度 (中央部) | ℃ | 270-290 | 280-300 |
料管溫度 (前部) | ℃ | 280-310 | 280-300 |
噴嘴溫度 | ℃ | 280-310 | 280-300 |
模具溫度 | ℃ | 80-110 | 80-120 |
射出圧力 | MPa | 50-150 | 50-150 |
螺桿回轉數 | rpm | 50-100 | 50-100 |
LEXAN 915R PC/PC中高流動,良好的釋放性,UL94VO/塑料的系列型號：
| LEXAN LUX763C | PC | 具有良好的擠出性能，良好的加工性，紫外線穩定性，非氯和非溴阻燃劑，UL |
| LEXAN LUX763C | PC | 具有良好的擠出性能，良好的加工性，紫外線穩定性，非氯和非溴阻燃劑，UL |
| LEXAN LUX913C | PC | 具有高流動性，良好的加工性，非氯和非溴阻燃，UL等級V-0 |
| LEXAN LUX9130T | PC | 具有良好的加工性，紫外線穩定，非氯和非溴阻燃，UL等級V-0和5VA。高透光 |
| LEXAN LUX9132C | PC | 具有高流動性，良好的加工性，非氯和非溴阻燃，UL等級V-0。 |
| LEXAN LUX9136C | PC | 具有高流動性，良好的加工性，非氯和非溴阻燃，UL等級V-0。 |
| LEXAN ML6411 | PC | 抗沖改性PC樹脂與非溴化，非氯化阻燃體系。UL-94 V0和5V列出 |
以下是沙伯基礎SABIC塑料LEXAN 915R PC物性表參數：
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS | |
|---|---|---|---|---|
| MECHANICAL | ||||
| Tensile Stress, yield, 50 mm/min | 63 | MPa | ISO 527 | |
| Tensile Stress, break, 50 mm/min | 60 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 6 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 85 | % | ISO 527 | |
| Tensile Modulus, 1 mm/min | 2350 | MPa | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 90 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2300 | MPa | ISO 178 | |
| Ball Indentation Hardness, H358/30 | 95 | MPa | ISO 2039-1 | |
| IMPACT | ||||
| Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, unnotched 80*10*3 -30°C | NB | kJ/m2 | ISO 180/1U | |
| Izod Impact, notched 80*10*3 +23°C | 65 | kJ/m2 | ISO 180/1A | |
| Izod Impact, notched 80*10*3 -30°C | 11 | kJ/m2 | ISO 180/1A | |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 65 | kJ/m2 | ISO 179/1eA | |
| Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 12 | kJ/m2 | ISO 179/1eA | |
| Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | NB | kJ/m2 | ISO 179/1eU | |
| THERMAL | ||||
| Thermal Conductivity | 0.2 | W/m-°C | ISO 8302 | |
| CTE, 23°C to 80°C, flow | 7.E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 80°C, xflow | 7.E-05 | 1/°C | ISO 11359-2 | |
| Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 | |
| Ball Pressure Test, approximate maximum | 135 | °C | IEC 60695-10-2 | |
| Vicat Softening Temp, Rate B/50 | 140 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 141 | °C | ISO 306 | |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 122 | °C | ISO 75/Af | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 134 | °C | ISO 75/Bf | |
| HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm | 133 | °C | ISO 75/Be | |
| HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm | 122 | °C | ISO 75/Ae | |
| Relative Temp Index, Elec | 130 | °C | UL 746B | |
| Relative Temp Index, Mech w/impact | 120 | °C | UL 746B | |
| Relative Temp Index, Mech w/o impact | 125 | °C | UL 746B | |
| PHYSICAL | ||||
| Mold Shrinkage on Tensile Bar, flow | 0.5-0.7 | % | SABIC method | |
| Density | 1.2 | g/cm3 | ISO 1183 | |
| Water Absorption, (23°C/sat) | 0.35 | % | ISO 62 | |
| Moisture Absorption (23°C / 50% RH) | 0.15 | % | ISO 62 | |
| Melt Volume Rate, MVR at 300°C/1.2 kg | 18 | cm3/10 min | ISO 1133 | |
| ELECTRICAL | ||||
| Volume Resistivity | >1.E+15 | Ohm-cm | IEC 60093 | |
| Surface Resistivity, ROA | >1.E+15 | Ohm | IEC 60093 | |
| Dielectric Strength, in oil, 3.2 mm | 17 | kV/mm | IEC 60243-1 | |
| Relative Permittivity, 1 MHz | 2.7 | - | IEC 60250 | |
| Dissipation Factor, 50/60 Hz | 0.001 | - | IEC 60250 | |
| Dissipation Factor, 1 MHz | 0.01 | - | IEC 60250 | |
| Comparative Tracking Index | 225 | V | IEC 60112 | |
| Relative Permittivity, 50/60 Hz | 2.7 | - | IEC 60250 | |
| FLAME CHARACTERISTICS | ||||
| UL Recognized, 94V-0 Flame Class Rating | 1.1 | mm | UL 94 | |
| Glow Wire Flammability Index 850°C, passes at | 1 | mm | IEC 60695-2-12 | |
| Glow Wire Flammability Index 960°C, passes at | 1.6 | mm | IEC 60695-2-12 | |
| Glow Wire Ignitability Temperature, 0.8 mm | 800 | °C | IEC 60695-2-13 | |
| Oxygen Index (LOI) | 35 | % | ISO 4589 | |
| Injection Molding | ||||
| Drying Temperature | 120 | °C | ||
| Drying Time | 2-4 | hrs | ||
| Maximum Moisture Content | 0.02 | % | ||
| Melt Temperature | 280-300 | °C | ||
| Nozzle Temperature | 270-290 | °C | ||
| Front - Zone 3 Temperature | 280-300 | °C | ||
| Middle - Zone 2 Temperature | 270-290 | °C | ||
| Rear - Zone 1 Temperature | 260-280 | °C | ||
| Hopper Temperature | 60-80 | °C | ||
| Mold Temperature | 80-100 | °C |
相關產品
Related products
